Yes this is possible, with the caveat that the Exchange server (if offbox for UM as an example) hosting the subscribers' inboxes are in the same Exchange administrative/routing group (this is Exchange 2000/2003 design). If the Exchange servers are in different routing groups, you will need a Unity server installed for each routing group. We have several domains that share a centralized email infrastructure and have one Unity server. The permissions are accomplished when you run the Unity permission wizard (you will need to add any domain you will have subscribers in) OR add a domain that is high enough in the AD forest to encompass all the other domains. If you are running Exchange 2007, it uses AD Sites for mail routing. I cannot comment on the Unity design in that infrastrucure yet.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...