I have a quick simple question I hope. I have a Unity connection 1.2 with two Languages English and French. How to I make sure that if a user hits a french Mailbox they get French if thats the language they should get. I have set the 'Inherit Lannguage setting' and it seems they get the system default language 'English' Any ideas on how to make the dual language work
You can force the language of the inbound call by going through a call handler that has French selected (i.e. instead of inherit) and/or forcing the languge on the subscriber in the same way. The routing rules should also accomodate a language setting.
If no language is explicitly set the call will fall back to using the default (ENU out of the box) when an "inherit" language option is encountered. Once the call is set for a language (by a routing rule or call handler) it "sticks" to the call until it hits another explicit language change.
Jeff Thanks.. If I force the mailbox to French and not inherit that should work? I did try a routing rule with french but had two issues one the port usage spiked and I tried to wild card the forwared field and it wouldnt let me even though the help says yes.
I also want to put the service release on as this is a fresh 121 load.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...