09-01-2014 03:35 PM - edited 03-19-2019 08:33 AM
Hi everyone,
I am trying to install Unity Connection 7.1.5b or 8.0(3a) as a first step before upgrade to 10.5; I am using UCS C220 M3 SFF, VMWare Sphere ESXi 5.5, using OVA from Cisco, but I am getting the following errors each time:
Has anyone has fixed this error before?
Be great to get some advice.
Cheers
Solved! Go to Solution.
09-02-2014 06:32 AM
Hi Alberto.
Which template did you downloaded?
Check the network adapter configured on VM ad if E1000 , change it to Felx.
This caused me a similar issue while installed cucm 8.5
HTH
Regards
Carlo
09-01-2014 03:36 PM
09-02-2014 05:48 AM
Hi,
I have never faced this issue.But the attached snapshot points to Ethernet auto-negotiation issue.
Did u check the settings on switch?
regds,
aman
09-02-2014 06:32 AM
Hi Alberto.
Which template did you downloaded?
Check the network adapter configured on VM ad if E1000 , change it to Felx.
This caused me a similar issue while installed cucm 8.5
HTH
Regards
Carlo
09-03-2014 09:21 AM
Hi!
Problem solved, I changed the network adapter type from VMXNET3 to E1000 just like Carlo recommended.
I was able to install CUC 7.1(5b) in VM
cheers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide