Unity Connection 7.1 takes 4 rings before it answers all of a sudden
Over the past several weeks we've had a problem of when you push the mesage button on your phone it takes 3 or 4 rings before Unity Connection answers. It has always answerd immediately and at times still will, but for the most part takes multiple rings. I've started up real time monitor and the port monitor for Unity and most of the 96 ports show idle while my phone is rining and waiting for Unity to answer. Any ideas on where to look for the cause?
Unity Connection 7.1 takes 4 rings before it answers all of a su
Scott - We are running 8.51ES92.14900-92 and have experienced the same problem randomly. We did the same as you running the port monitor and have most idle. I will be interested to hear if any other sites have experienced this and if they have resolved the issue.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...