Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity Connection 8.5 and AA for users without mail-box

Hi All,

I faced a problem in Unity Connection 8.0 when I tried to configure AA for users without mail-box. I defined them as contacts but when I am trying to dial any extension the system was not able to route the call. I have to use dial by name rather than extension.

My question si:  Is it the same for Unity Connection 8.5 and 8.6 ???

Is there any workaround??

Regards,

3 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Unity Connection 8.5 and AA for users without mail-box

Check this under greeting:

Allow Transfers to Numbers Not Associated with Users or Call Handlers

This is asked quite frequently, a search on CSC would have provided the answer to your question.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Hall of Fame Super Red

Unity Connection 8.5 and AA for users without mail-box

Hi JFV,

Hope all is well

This capability has been around since CUC 7.x;

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsag115.html

Cheers!

Rob

Please remember to tag your threads and help support "Teachers without Borders"

https://supportforums.cisco.com/community/netpro/idea-center/communityhelpingcommunity

Cisco Employee

Unity Connection 8.5 and AA for users without mail-box

You need to adjust the "Default System Transfer" restriction table under System Settings | Restriction Tables.  By default it allows no number to be dialed for the system transfer conversation (for security of course) - you'll want to adjust it carefully to open up local number/extensions without exposing yourself to folks dialing long distance numbers on your dime.

6 REPLIES
Cisco Employee

Unity Connection 8.5 and AA for users without mail-box

Check this under greeting:

Allow Transfers to Numbers Not Associated with Users or Call Handlers

This is asked quite frequently, a search on CSC would have provided the answer to your question.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Unity Connection 8.5 and AA for users without mail-box

Thank you too much.

Is this new in UC 8.5??

Hall of Fame Super Red

Unity Connection 8.5 and AA for users without mail-box

Hi JFV,

Hope all is well

This capability has been around since CUC 7.x;

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsag115.html

Cheers!

Rob

Please remember to tag your threads and help support "Teachers without Borders"

https://supportforums.cisco.com/community/netpro/idea-center/communityhelpingcommunity

New Member

Unity Connection 8.5 and AA for users without mail-box

Hi,

Sorry to reply just now. I created a lab and I tried to do the following:

Call Management >> System Call Handlers >> Opening Greeting:

Active Schedule = All hours.

Edit >> Greeting >> Standard >>

During Greeting = Allow Transfers to Numbers Not Associated with Users or Call Handlers

After that I called Unity:

Hello Cisco Unity Connection Messaging system … and I dialed the extension 1001 but UC answered me:

“You cannot be transferred to this number, check the number and try again.”

all other configuration to default.

Cisco Employee

Unity Connection 8.5 and AA for users without mail-box

You need to adjust the "Default System Transfer" restriction table under System Settings | Restriction Tables.  By default it allows no number to be dialed for the system transfer conversation (for security of course) - you'll want to adjust it carefully to open up local number/extensions without exposing yourself to folks dialing long distance numbers on your dime.

New Member

Unity Connection 8.5 and AA for users without mail-box

Thank you all for your help

all of you helped me to get the correct answer.

1325
Views
5
Helpful
6
Replies
CreatePlease login to create content