Unity Connection 8.6.1 - Upgrading Exchange 2003 to 2010 SP
I'm trying to find documentation specifically for this upgrade, not so much what is required for Exchange to upgrade to 2010 SP1, but what is need to support Unity Connection, and what needs to be done in Unity Connection if anything to support this.
Does anyone have any articles or docs on performing this, or know the high level on what needs to be covered off if any?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...