Customer has a new Unity Connection 8.6.3 cluster. One site is in Los Angeles, and the other in Phoenix. The publisher (in Los Angeles) is set to use LA Time. The subscriber, located in Phoenix (which incidentally doesn't observe DST, but is not available as an option), is set to Denver.
All the users are in PST. The timestamps of all the messages are showing up one hour ahead.
Both servers using the same NTP and are synced. Both systems set to their timezones.
Each user is set to the Los Angeles time on the first page of the user account.
Messages retrieved are all coming up one hour ahead.
Thanks guys. I wasn't aware of this particular little issue.
I spoke with TAC about it. I'm kind of puzzled as I'd think messages would be stored with UTC date time stamps, and then read out based on the setting of the individual user. TAC indicated that their was a documentation defect bug about this, but there are currently no plans to change the behavior.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...