but there is not a corresponding version for Connection. The bulk handler tool has been on the chopping block for a while since it gets almost no downloads and the overhead for maintaining it and porting it between versions is not worth keeping it around with that kind of usage.
I sure understand that resources are finite, and bulk call handler create is something we don't need very often. BUT: when we need it, we really need it. As an installer, my vote is: please keep it around! It saves HOURS.
Whichever way it goes, thanks for all the good work, Jeff.
Yes, PLEASE create an interface to Connection 2.x that let's us bulk create Call Handlers. My company works with school districts and we lose SO MUCH TIME creating hundreds of call handlers. Cisco, we could be out selling more systems if we weren't so busy manually entering Call Handlers! :-P
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...