Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Unity Connection Cluster - DNS resolution

It is posible to remove DNS resolution in a cluster AFTER the cluster is set (AKA: both unity Connection were installed using DNS resolution)?

Version 7.1

Thanks

5 REPLIES

Re: Unity Connection Cluster - DNS resolution

The installation rules for DNS are that if you do not configure it on initial install, then you cannot enable it post-installation without rebuilding the system.  My inclination is that the reverse is also true.  I also tested trying to remove the DNS configurations on a 7.1(3b)SU1 CUC server in my lab and there doesn't appear to be a valid command to do this.  You can change the primary and secondary DNS servers; however, you cannot disable DNS.

Hailey

Please rate helpful posts!

Community Member

Re: Unity Connection Cluster - DNS resolution

Hi

If you take out the DNS server(s)s you will disable DNS resolution.

- Alex

Re: Unity Connection Cluster - DNS resolution

Alex,

Have you attempted to do this on a 7.1 server? If you attempt to set a blank DNS server, you get a CLI error for a missing, required configuration parameter...at least I did.

Hailey

Community Member

Re: Unity Connection Cluster - DNS resolution

There is a command for clear DNS server.

- Alex

Re: Unity Connection Cluster - DNS resolution

What command would that be?

665
Views
0
Helpful
5
Replies
CreatePlease to create content