trying to create a forwarding rule in unity connection, basically i cfwdall my 13xx ext to cti rp 777. I want to avoid using a vm profile under 13xx ext so thats where the forwrding rule comes in, I want to get calls hitting 13xx to hit a handler. I cant seem to get the forwarding rule to work. Ive tried creating a new rule that says send call to specific handler and edited the rule saying forwarding station equals 13xx etc, basically Ive tried a good few options here but i cant seem to get the rule to work, calls are just being forwarded to unity as opposed to handler. any ideas?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...