1. Boss want to divert phone to PA and also want VM to go to PAs VM box when diverted no problem, created VM with mask of PAs phone, and applied to bosses phone so far so good. Boss want to take divert to PA off and for VM to go to his VM box, what the best way to do this without changing profile, or can it not be done this way.
2. Caller calls VM box from external source so has to enter ID (10 digit ext) and password, they want to bypass the ID part, and just enter PIN I don't think this can be done, this is one office on a cluster that supports many offices slit has to be unique for them not cluster wide.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...