Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity connection sip trunk issues

Hi,

I have an issue regarding a unity connection 2.1 - CUCM 6.1.2 sip integration. It seems to be a fundamental issue, so I'm wondering whether any have you have seen this before.

User 'A' who is an enrolled subscriber puts his / her phone on CFA to voicemail. When this user is called from another subscribers phone the caller hears 'please enter your password', rather then the intended personal recorded greeting.

I'm not sure whether this is an issue with information being / not being passed the configured sip trunk.

Thanks in advance

Steve

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Unity connection sip trunk issues

Make sure you have the "Redirecting Diversion Header Delivery" checkbox(es) checked in your SIP trunk configuration on the CUCM.

-Eric

6 REPLIES
Cisco Employee

Re: Unity connection sip trunk issues

The supported CUE integration with CUCM is still only via JTAPI. Aside from the signaling issues, the Intialization Wizard in CUE won't be able to understand what's happening.

Make sure you've got a CUCM license in CUE and use the JTAPI integration methond and things will be fine.

There is an effort to support this at some point in the future, but I really am not aware of specific details at this point.

New Member

Re: Unity connection sip trunk issues

Hi,

Thanks for your response, however it is not CUE we are using, it is Unity Connection. I don't suppose you have experience in this area do you?

Thanks again,

Steve

Cisco Employee

Re: Unity connection sip trunk issues

Make sure you have the "Redirecting Diversion Header Delivery" checkbox(es) checked in your SIP trunk configuration on the CUCM.

-Eric

New Member

Re: Unity connection sip trunk issues

Thank you, that has now resolved the issue! Any ideas why MWI is not being sent?

Thanks again,

Steve

Cisco Employee

Re: Unity connection sip trunk issues

For MWI did you check the "Accept Unsolicited Notification" box in CUCM's trunk config?

Sounds like you've missed a couple settings. You might want to take a second walk through the Config Guide...

http://www.cisco.com/en/US/products/ps6509/products_installation_and_configuration_guides_list.html

-Eric

New Member

Re: Unity connection sip trunk issues

Hi Eric,

Yes I have checked that box and I have been through the config guide a number of times. Any other ideas?

Steve

566
Views
0
Helpful
6
Replies
CreatePlease login to create content