UC is an applicance, it's not important really that it runs on Linux, you will never have access to Linux. You have a web page which is very similar to Unity that has all of what you need and if needed you get console access via a CLI that is specifically written for UC & CCM not a linux login.
If you've used CM 5+ then it's just like that.
I think anyone who is used to administrating Unity could make the switch over to Connection pretty easily and not have much of a relearning curve at all.
Basically though in Unity you needed to maintain Windows & Unity, in UC you only have to do voicemail stuff. No OS maintaince, we deal with all of it for you.
Your local account team could setup a demo for you if you wanted to get some hands on time.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...