I have HP server to build exchange off box with 4EA HDD(72G each). RAID1 for 1st two(slot 0/1) and 2nd two(slot 2/3). the partition is C and D from 1st set and E from 2nd set. the requirement is more than 72G for exchange voice mail box. Can I combine D and E into single partition to make about 130G?
How many users are you planning to support for this off-box Exchange server? Is this for Windows 2003 SP2, Exchange 2003? I would recommend 20Gig just for the OS partition. To be honest, this really is not the best practice configuration for an Exchange server. I included a link for your review -
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...