I was following Cisco doc to add Canadian French into Unity Express 7.0.5. It went through with no errors and restarted. However, I still could not see the new added language installed. When I show software version detail, it still says global support and US English installed. Did I miss anything?
I do not want to change the system default language. I only want to add one addtional language to an auto attendant. I thought by following the dow below, I am able to select the language setting of the AA from either GUI or CLI:
My bad! I thought you were changing the default language.
Can you give us the output from;
Enter the show software license command to display the base port license on the system and to display the number of ports available in the field "Total usable system ports". If a base port license is not available (this will be the case unless you have CUE-NME), "Total usable system ports" displays "24".
Note If you have not yet reloaded the system with the new license, the old license information appears.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...