Unity Express GUI or Call Manager Express with MAC OS
Should the GUIs of Unity Express and Call Manager Express work on a MAC OS machine? My customer has Internet Explorer on the MAC machine.
The Unity Express Admin guide for the GUI says:
"The GUI and CLI are accessible from a PC or server anywhere in the IP network. To access the GUI, use Microsoft Internet Explorer 6.0 or a later release. Cisco Unity Express does not support any other browser."
The Admin Guide of the CCME says:
"The web browser that you use to access the GUI must be Microsoft Internet Explorer 5.5 or a later
version. No other type of browser can be used to access the GUI".
Anybody made it work? I seemed to have problems. Is there a minimum Java version required?
Re: Unity Express GUI or Call Manager Express with MAC OS
I'm not as familiar with CME, but with CUE, no other browser is supported--as the docs say, but from my experience it seems to work fine from a Mac (either firefox or safari) except for actions that involve uploading or downloading things (custom scripts, prompts, etc).
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...