We're in the process of implementing Unity for a security conscious customer. There's a firewall sitting between the Unity and Exchange server. We have problems with the Notify module in that after 60 minutes the authentication appears to fail and notifications fail. We've temporarily got around it by scheduling a restart of the AvNotifierMgr service every 55 minutes.
It looks like the firewall is dropping the connection after 60 minutes.
Does anyone know what the default "idle"time is on the Unity, or where this can be changed?
Has anyone seen this fault before and shed some light on a better solution than restarting services?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...