I have two Unity servers, one has Exchange on box and the other has Exchange off box. I am wondering how to set these servers up so that I can forward messages from one to the other. We are running Unity 3.X and 4.
That will give you an idea of the range of options you have at your disposal.
The best options would be to have both Exchange servers in the same directory (you didn't give us much details on your topology - on vs. off box doesn't have much bearing on the question at hand here).
I'd read through the doc and get a feeel for how this works in general and then come back with more specific follow up questions.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...