Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity integration with CUCM6

hi there!

i have installed CUCM v6 and Cisco Unity from the same disk on VMware for testing purposes. how can i integrate them? do i need Unity Telephony Integration Manager (Utim). Where should i get that tool?

thanks in advance..

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Unity integration with CUCM6

If you have installed the product from the same disk as CUCM 6.1 I presume that you are talking about Unity Connection 2.x rather than Windows based Unity.

The relevant guide for integrating CUCM using SCCP can be found at the link below.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/integration/cucme_sccp/guide/cucintcucmesccp.html

Please rate if helpful.

4 REPLIES
Cisco Employee

Re: Unity integration with CUCM6

Of course you need the UTIM

To Add a UTIM Cluster to a Cisco Unified CM Integration

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/401/integration/guide/cu4xintskinnycucm6x.html#wp1842814

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Unity integration with CUCM6

where can i get UTIM ?

thanks in advance

Re: Unity integration with CUCM6

If you have installed the product from the same disk as CUCM 6.1 I presume that you are talking about Unity Connection 2.x rather than Windows based Unity.

The relevant guide for integrating CUCM using SCCP can be found at the link below.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/integration/cucme_sccp/guide/cucintcucmesccp.html

Please rate if helpful.

New Member

Re: Unity integration with CUCM6

thank you very much!!!

138
Views
0
Helpful
4
Replies