Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity integration with multiple CallManager clusters

I know that Unity can support integrations to more than 1 CM.

The Cisco documentation assumes your clusters are all running the same release of CM.

Does Cisco support a Unity integrating to 2 different (eg. 3.3 and 4.1) versions of CM?

thanks,

Scott

2 REPLIES
Cisco Employee

Re: Unity integration with multiple CallManager clusters

From a technical standpoint, I don't see why this would be a problem as long as both versions of CCM are compatible with the same version of the Unity-CCM TSP.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_device_support_table09186a0080531eb8.html

What documentation are you refering to that suggests all CCMs are running the same version?

Regards,

Eric

New Member

Re: Unity integration with multiple CallManager clusters

Eric, thanks for the link. The compatibility table spells out exactly what versions of CCM are compatible with different Unity versions.

The docs I looked at: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_white_paper09186a00800872c8.shtml and http://www.cisco.com/en/US/partner/products/sw/voicesw/ps2237/products_white_paper09186a00800872bc.shtml

only referred to CCM 3.0 and 3.1

The customer wants to transition from CCM3.3 to CCM 4 or 5, so they needed to determine if they could get away with splitting the ports on the Unity to service both clusters.

Best regards,

Scott

141
Views
4
Helpful
2
Replies