Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Unity Integration

I am going to be integrating some centrex lines or a T1 from a customers telco. If I use a T1 do I need to use the TIMG gateway and an RS-232 cable. How would this work to get the telco lines to forward to a pilot number?

1 REPLY
Silver

Re: Unity Integration

What version of Unity are you installing?

Here is the guide for 5.0 and all versions are similar for this integration however it is better to have the integration guide for that paticular version.

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/integuid/cxsecu5x.htm

Yes you would have a modem from the telco and a smdi (rs-232) cable. There is a diagram in this doc of how it is set up.

The Unity server will have voice boards for the analog.

so analog lines from the telco go to the voice boards in the server, and a rs-232 cable goes from the modem to the server.

Again what version of Unity are you installing?

rlp

100
Views
0
Helpful
1
Replies