Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity languages not replicating in failover

we have unity 5.x on box failover, all config replicates from primary active to secondary inactive except loaded languages - make a change on either phone or gui language on primary and it does not replicate???

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Unity languages not replicating in failover

Hi Jag,

I'm guessing you may be seeing this restriction;

Note: If you have a Cisco Unity failover system, phone languages settings are not replicated between the primary and secondary servers. You must change values manually on both servers.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_configuration_example09186a00809bf3f5.shtml#maintask1

Failover Data That Is Not Replicated

Changes to the following Cisco Unity settings are not replicated between the primary and secondary servers. You must manually change values on both servers.

•Registry settings

•Recording settings

•Phone language settings

•GUI language settings

•Port settings

•Integration settings

•Media Master server name settings

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/403/failover/guide/ex/FG_040.html

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: Unity languages not replicating in failover

Hi Jag,

I'm guessing you may be seeing this restriction;

Note: If you have a Cisco Unity failover system, phone languages settings are not replicated between the primary and secondary servers. You must change values manually on both servers.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_configuration_example09186a00809bf3f5.shtml#maintask1

Failover Data That Is Not Replicated

Changes to the following Cisco Unity settings are not replicated between the primary and secondary servers. You must manually change values on both servers.

•Registry settings

•Recording settings

•Phone language settings

•GUI language settings

•Port settings

•Integration settings

•Media Master server name settings

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/403/failover/guide/ex/FG_040.html

Hope this helps!

Rob

New Member

Re: Unity languages not replicating in failover

Rob,

thanks for the answer.

130
Views
0
Helpful
2
Replies
CreatePlease login to create content