The message notification icon envelope, which is displayed next to the line extension # of the IP Phone, is indicating there's a message in the inbox. However, when attempting to retrieve the message, the Unity system response tells me there are NO new messages! Also, in viewing the Unity Account, it shows that the MWI is OFF. Is this a bug? If yes, I would appreciate if you can direct me to a patch. Is there a way to reset the voicemail box, so that, I can remove the message icon( envelope next to the phone extension)?
Good tips Brad! Now that you mention this, it could be that 1 of the 15 persons that are sharing this line, is accidently dialing our designated 4-digit number and turning ON the Message Icon ( this assumes they must have selected the shared line to place the call). Which explains why there is no new messages in the Inbox when they go and check for new messages! I'm going to call this one a closed deal. Thank You & your friend for your help
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...