Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Unity MWI Utility

For Unity 4.x - is there a utility that can turn on or cancel the lamp for all users in the database? (with mwi allowed)

Thanks,

Scott

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: Unity MWI Utility

Try statusmonitor.exe under X:\CommServer\TechTools

3 REPLIES
Green

Re: Unity MWI Utility

Try statusmonitor.exe under X:\CommServer\TechTools

Cisco Employee

Re: Unity MWI Utility

In the \CommServer\TechTools folder there's a utility called statusmonitor.exe which has a Set MWI button. This might get close to what you need. In the Destination Address field you can put an extension or range of extensions or a list, e.g. "101,105,110-156,207-298". This tool is intended as a troubleshooting tool for TAC so don't expect to find much documentation or support for it. If you can, play around with it on a lab system to see if it will work for you.

Good luck,

Eric

New Member

Re: Unity MWI Utility

Thanks, I will try it on my lab system.

Regards,

Scott

105
Views
0
Helpful
3
Replies
CreatePlease to create content