I have looked into this and you are correct that CCM 4.1(3) does not have authenticate.jsp. This is an error in the troubleshooting doc. The document should have separate sections for 4.x and 5.x+ for this troubleshooting step. Using authenticate.asp is the correct thing to do in that step. Sorry about the confusion.
Did you ever get a resolution for this? I'm hitting same issue with Unity 5.0(1) Phone View and CallManager 4.1(3)SR6. I suspect it has something to do with MLA, and this customer deleted CCMAdministrator when they setup MLA. I am using a user who under MLA is in the SuperUserGroup but still failing.
10:58:04 Attempting to connect to a CUCM/CCM Server and retrieve its device list.
10:58:04 Trying to connect to 10.75.250.102:80
10:58:04 Connect succeeded - Trying to retrieve devices from 10.75.250.102
10:58:04 Attempting to retrieve the list of phone devices
10:58:04 from CUCM/CCM. This may take a moment...
10:58:07 Successfully retrieved the list of
10:58:07 3490 phone devices from CUCM/CCM..
10:58:07 Retrieving registration status and device info for
10:58:07 device list items 1 to 200 of 3490.
10:58:08 Error: Phone View - WinHttpReceiveResponse failed in OpenRequest
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...