Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity ports

There is a way to keep disabled unity port from registering into CCM?

I had a Unity with 80 ports, but I need to register only 20 of them. I already configure 20 of them and disable the rest on the UTIM tool. The problem is that the rest keep trying to register on CCM.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Unity ports

You would need to remove the port using UTIM to keep it from registering.

Hope this helps. If so, please rate the post.

Brandon

2 REPLIES

Re: Unity ports

You would need to remove the port using UTIM to keep it from registering.

Hope this helps. If so, please rate the post.

Brandon

Cisco Employee

Re: Unity ports

As Brandon mentions you need to remove them from UTIM, if you add them as part of an integration in Unity they will keep trying to register.

you can add and remove the ports so you don't have to worry about not being able to add the ports if you need them later

just be aware that you will be asked to stop/start unity for the procedure so most probably you'll have to get some maintenance time to do that

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
137
Views
0
Helpful
2
Replies