I'm migrating an existing POV system to a Mixed license mode system. I need to change the existing VM aliases from for example jbloggs to jbloggs_vm. is there anyway of doing this in bulk - i have changed this on individual accounts and works ok but I need to change 200 VM subscribers aliases to a similar format, i.e add '_vm'.
This will allow me to use DIRT to migrate users from the POV system to the new system which is integrated in the customers AD.
I dont think you can bulk edit existing users with the type of edit you want to do. You can do about every other bulk edit in the world, BUT.. that one. If you were changing Domains, you could change the Exchange Receipent Policy in the "Messenging" server. For instance, every time you created a new users, you can have the domain be *@company.com. Or another recipent policy update @company.com to @companyb.com and it would add this to their smtp addresses.
The only way I think you can do this, is to have some create a SQL script to go in and change the Alias table on of the unityDB. You can actually open up the unityDB table and find the ALIAS section. Update one manaul and see if works. If it does work, if you are a SQL guru (I'm not ugg.) have them create a script for what you need.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...