Depends on what you are running. If you running a ton subscribers on one server, then you may see delays when pressing prompts. For isntance, someone logs into VM on their phone and unity waits 5 seconds to say xxxx. This would be Unity searching through the database sloooowly trying to figure out what to do next.
Typically, like any windows box, you should reboot the server. Memory leaks are common after x amount of time. If your are running SQL 2000, make sure you are running the latest Service Pack.
On CCO, there is a new MS Unity updates package you can download. This will contain all the MS updates recommended by Cisco for Unity. Works great and you will need to run this monthly. (when it is released)
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...