I have a customer who has requested that I upgrade their 3 existing Unity 4.04 UM servers to 4.05 in order to allow them to use the COBRAS export utility to migrate their users over to a 7.02 Unity platform. I've read through the "Upgrading Cisco Unity 4.x software to shipping version" guide but was curious if anyone had been through the process of stepping up from 4.04 to 4.05 and if there are any issues that I should be aware of since I've read through threads stating the upgrade has taken them anywhere from 2 hours per server to 6. The existing Unity 4.04 servers are integrated with Exchange 2003. Thanks for any input.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...