Can someone help me with a question? With Unity 4.2 the subject line has changed to be "message from unidentified caller (XXX-XXX-XXXX)". I've changed the subject line with no problem. But customer is asking why the calling name isn't displayed in the subject line. If it is an internal caller, it works fine. Can some tell me where I can go to fix this issue or tell me that it can't be done and give me an idea why. Look at call viewer in Unity it only shows the number and not the name.
Unity does not get the name from call manager, just the number. On external calls from non-unity subscribers it uses the unity server mailbox to leave the voicemail in the users mailbox.
For calls from extensions that are on the unity server, unity sees that extension as a subscriber so uses that users mailbox to send the VM. This is why you see a name on these, because it knows it is from the number. Example, if Bob at extension 3000 calls Joe at extension 3010, when the call rolls to VM unity see's it is 3000 calling 3010 and has a subscriber with extension 3000 and another with extension 3010 so it can populate both names.
There is a seperate subject line customization for external calls, then internal calls so you can make the external calls from non-subscribers subject different.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...