I am upgrading from Unity 4.2 to 5.0 with new hardware. The new box is up and running fine. I am able to move users to the new box, however the moved users voicemail does not come up with a caller. Both boxes are using the same pilot number, but the new box has new "internal" voice mail ports. If I move the new voice mail ports up in priority, then the moved users work, but the old users don't... thoughts?
. You also have to delete users off the old unity prior to importing them on the new server. I'm assuming you are using exchange as a VM store. be sure to select the new integration on the subcriber template prior to importing
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...