On Cisco Unity Design Guide it says for Cisco Voice Messaging(Exchange 2000) configuration, the Exchange 2000 can be installed on the same server as Unity or a separate server dependin on the number of subscribers that needs to be supported by Cisco Unity.
Could someone help me any link for the guide on how many number of subcribers we need install Exchange 2000 on a separate server?
In terms of mailboxes, each Exchange server can support 4000 users. While Unity itself can handle 7500 on a single 7845 server, if you have Exchange running on the same box, it's only 4000 (because of the Exchange limitations).
If you want 7500 users, you need a single Unity server and TWO back-end, off-box Exchange message stores because each one can only handle 4000 users (7845 servers of course).
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...