Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
aod
Community Member

unity4.2 UTIM

I have two CallManager servers (pub & sub) where we are changing the ip address. The two CCMs are integrated to a unity failover configuration. So, do I simply change the ip address in Unity's UTIM. Is there anything else I need to do, such as reboot the servers, or restart a services?

1 REPLY

Re: unity4.2 UTIM

Hello -

When you make a change in Unity UTIM, such as the CallManager IP addresses, it will ask you to restart Unity after pressing the Save button. Does not require a reboot. You select the Integration name, not Properties. Highlight the IP address and select Modify. When you make the change in UTIM, I would test the connection using the Verify Servers button to make sure Unity can contact the servers. By restarting the Unity services, you should see the voice ports reconnect to CallManager. This is the only area you need to change.

Ginger

115
Views
0
Helpful
1
Replies
CreatePlease to create content