Voice-recognition features allow subscribers to interact with Cisco Unity by speaking rather than by using the phone keypad. The features are licensed by number of concurrent sessions, and ***require installation and configuration of voice-recognition software on a separate and dedicated server. Voice recognition is not available to outside callers.
In addition to what Rob mentioned, if you happen to have another server at your disposal, you may want to look into Speech Connect which gives the outside callers the flexibility of having their voice recognized.
Basically what that's saying is that you can configure a phone to PLAR to Speech Connect to eliminate dial tone. And the speed-dial is pretty self explanatory, setup for dialing Speech Connect directly from a phone.
I dont consider the speech recognition engine that requires you to say "3" instead of "delete message" as "cool". If you have to know the DTMF option why would you say it? That was the how Unity speech connect behaved last time I checked. It has some way to go in my opinion to be worth implementing, especially with dedicated server.
I have to agree that some of this has limited application value for many (but not all) users. We just worked with the "Speech Recognition" portion of UC 7.0 over the last number of months but not like this Speech Connect. I did think of some applications for accessability that would be worthwhile for sure. I just like the added flexability that these options provide.
I can see some good value for users who don't like searching through the IP Phone directory, so maybe set them up with a Speed Dial key to the "Speech Connect" Voice directory. I could search for "Chris Deren" just by saying your name:)
The PLAR idea has some merit for phones that are in Lobby's or secure areas that you want to be able to contact users without knowing their DN's etc.
+5 points for weighing in on this my friend. As always, much appreciated.
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...