I did upgrade from 6.1.2-1000 to 6.1.2-1107. From "OS Administration"->show->software, it says active version is still 6.1.2-1000, but "installed software option" is cmterm-devicepack18.104.22.1687-1.cop, what do that means? how can I make 22.214.171.1247 as active version?
that function can only switchover active and inactive version. In my case, select "version", it shows my active version is 126.96.36.1990, inactive version is 188.8.131.520, and I have another "installed software option" which is 184.108.40.2067, and it was shows "active" state. I don't understand what's that meaning. the home page still shows current version is 220.127.116.110. I don't know if 18.104.22.1687 is working.
The switchover function can only switch version between 22.214.171.1240 and 126.96.36.1990.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...