10-02-2010 07:54 AM - edited 03-20-2019 05:59 AM
Hi Guys,
just a question:
I have meeting place express 2.0 and i would like to upgrade to MP 7.0;
Can i upgrade directly or have i to perform a new intsallation for MP 7?
Regards,
Alessandro.
Solved! Go to Solution.
10-02-2010 09:01 AM
Hi Alessandro,
This is an excellent doc with the requisite steps for this migration
We currently only support migrations from Cisco Unified MeetingPlace Express Release 2.1.1 to Cisco Unified MeetingPlace Release 8.0; therefore, if you are using an earlier version of Cisco Unified MeetingPlace Express, you must first upgrade to Cisco Unified MeetingPlace Express Release 2.1.1.
Become familiar with the Cisco Unified MeetingPlace Release 8.0 system. To avoid multiple errors when importing data from the Cisco Unified MeetingPlace Express system to the Cisco Unified MeetingPlace Release 8.0 system, follow these tips:
Use the migrate_tool utility to export data from the Cisco Unified MeetingPlace Express system. The migrate_tool utility resides on the Cisco Unified MeetingPlace Release 8.0 system.
Cheers!
Rob
10-02-2010 09:01 AM
Hi Alessandro,
This is an excellent doc with the requisite steps for this migration
We currently only support migrations from Cisco Unified MeetingPlace Express Release 2.1.1 to Cisco Unified MeetingPlace Release 8.0; therefore, if you are using an earlier version of Cisco Unified MeetingPlace Express, you must first upgrade to Cisco Unified MeetingPlace Express Release 2.1.1.
Become familiar with the Cisco Unified MeetingPlace Release 8.0 system. To avoid multiple errors when importing data from the Cisco Unified MeetingPlace Express system to the Cisco Unified MeetingPlace Release 8.0 system, follow these tips:
Use the migrate_tool utility to export data from the Cisco Unified MeetingPlace Express system. The migrate_tool utility resides on the Cisco Unified MeetingPlace Release 8.0 system.
Cheers!
Rob
10-02-2010 11:23 AM
Hi Rob,
thx for replying.
So,in i understand well, i have to perform a new installation and then import data from my MPE?is it right?
Regards,
Alessandro.
06-19-2013 01:44 AM
Hello Rob,
As per the Doc only support migrations from Cisco Unified MeetingPlace Express Ver 2.1.1 to Cisco Unified MeetingPlace Release 8.0.
We have existing hardware & Software MPE Version 2.1.1.2.
MCS-7835-H2-RC2 : HP equivalent: Single Xeon 5140 2.33GHz Processor, 2G RAM, 2x 146GB HDD . If we use same hardware shall we need to upgrade the Memory to 4 GB or not .
Attached file is the existing license summary . Does this same license willl be support in the Meeting place 8.0 or not .
Regards
Syed
10-02-2010 04:06 PM
Hi Alessandro,
Yes, that is most correct my friend
Install new, then Import Data using Migration Tool.
Cheers!
Rob
10-03-2010 03:11 AM
thx Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: