I have an issue, I tried to upgrade the licence pkg file, I have done all the steps, I mean, I did the re-installation from the bootloader and everything, download all the files and so on. I follow all the steps, and the Re-installation is succesfull, but when I tried to upgrade the license file package the only error I saw is "ERROR - Hot Installation failed.". But I do not know if I missing any step, I think I followed step by step of the guide. Another thing I noticed is when the re-installation process ends and restarts, the initial configuration dont begin, instead I receive this;
Ok, for all that experience this trouble, this is only about the C1861 with an ISE-CUE who needs to migrate from CME to CCM, the only way that I can migrate is to put a licence for 50MBX and with clean installation was very easy.
Validating package signature ... done compatibility mode Validating installed manifests ............complete. The system will be brought to offline state for a brief period and will be brought back to online state automatically No work order produced. The system is back in online state 55296+0 records in 108+0 records out
Important:: A Reload is required in order for the new License to take effect.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...