Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrading Exchange on Unity

We are running Exchange 5.5 on Unity 4.0(3). Is it possible to upgrade to Exchange 2000 / Exchange 2003 without affecting anything on Unity?

Note - Exchange 5.5 is on the same box as Unity 4.0(30, but the Unity server is a member of our company domain. i.e. AD is integrated.

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: Upgrading Exchange on Unity

Are you running unified messaging or voicemail only? If unified messaging, Exchange must be on a seperate server. If voicemail only, you can upgrade to Exchange 2000/2003. However, Exchange 2003 requires Unity 4.0(5). It might be a good time to think about upgrading Unity as well. See the Reconfiguration and Upgrade guide below for Exchange upgrade steps.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/42/upgrade/guide/ex/ru_110.html#wp1260638

Hope this helps. If so, please rate the post.

Brandon

Re: Upgrading Exchange on Unity

Take a look at the following link.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/white/paper/mig/MigVM_UM.html

It referecnces Unity 3.1, but the concepts apply to later versions as well.

Hope this helps.

Brandon

4 REPLIES

Re: Upgrading Exchange on Unity

Are you running unified messaging or voicemail only? If unified messaging, Exchange must be on a seperate server. If voicemail only, you can upgrade to Exchange 2000/2003. However, Exchange 2003 requires Unity 4.0(5). It might be a good time to think about upgrading Unity as well. See the Reconfiguration and Upgrade guide below for Exchange upgrade steps.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/42/upgrade/guide/ex/ru_110.html#wp1260638

Hope this helps. If so, please rate the post.

Brandon

New Member

Re: Upgrading Exchange on Unity

Hi Brandon,

Thanks a ton for this excellent doc. Really helps a lot!

We are running Unity only, but have plans to upgrade to Unified Messaging in the near future. Is there any doc that lists all the steps necessary to move from a "Voice Mail only" configuration to Unified Messaging"? Thanks a lot.

Regards,

Abhijit Das.

Re: Upgrading Exchange on Unity

Take a look at the following link.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/white/paper/mig/MigVM_UM.html

It referecnces Unity 3.1, but the concepts apply to later versions as well.

Hope this helps.

Brandon

New Member

Re: Upgrading Exchange on Unity

Thanks a lot Brandon for your kind assistance. really appreciate it!

Have a nice day.

Regards,

Abhijit.

93
Views
0
Helpful
4
Replies