Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

upgrading from CCM 4.1(2) to 5.1

What is the process to upgrade from 4.1(2) to 5.1 on CCM - also what type of issues are to be looked for?

13 REPLIES
Hall of Fame Super Silver

Re: upgrading from CCM 4.1(2) to 5.1

Here are the links:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_1/install/upgrade/index.htm

First of all make sure your hardware meets the requirements, make sure that all integrated applications i.e. IPCC, Conferene Connection are upgraded as well.

Make sure you copy off MOH files as these are not migrated as part of the DMA.

Make sure you have sFTP running somewhere for backup as it's required.

HTH,

Chris

Hall of Fame Super Silver

Re: upgrading from CCM 4.1(2) to 5.1

Also there is no direct upgrade from 4.1(2) you first need to upgrade to 4.1(3).

Chris

Re: upgrading from CCM 4.1(2) to 5.1

Hi -

Something else I thought of ... if you have IPCC Express running in high-availability mode, this is not yet supported on CCM 5.x.

Ginger

New Member

Re: upgrading from CCM 4.1(2) to 5.1

Is HA slated for 6.0 for IPCC Express?

New Member

Re: upgrading from CCM 4.1(2) to 5.1

I thought you could go straight from 4.1(2) to 5.1 - ok, besides the MOH files - anything else crucial to consider?

Gold

Re: upgrading from CCM 4.1(2) to 5.1

You should be able to run DMA on 4.1(2) which is used to take a backup and upgrade to CM 5.1. Check DMA guide which says it is supported on CallManager 4.1(x) http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_1/install/upgrade/dmaug511.htm#wp55499

New Member

Re: upgrading from CCM 4.1(2) to 5.1

I tried to use the link listed to obtain the DMA program but was unsuccessful. The server could not be found. Has anyone else had that problem?

Bill

New Member

Re: upgrading from CCM 4.1(2) to 5.1

I just tried the link and it rendered with the information..... might want to try to copy the link and paste it in the browser.

New Member

Re: upgrading from CCM 4.1(2) to 5.1

We just tried it again on serveral different machines without any luck. The link that you we are trying to access is:

http://cco/cgi-bin/tablebuild.pl/cmva-3des

New Member

Re: upgrading from CCM 4.1(2) to 5.1

We just tried it again on serveral different machines without any luck. The link that you we are trying to access is:

http://cco/cgi-bin/tablebuild.pl/cmva-3des

New Member

Re: upgrading from CCM 4.1(2) to 5.1

I thought you were referring to the main link:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_1/install/upgrade/dmaug511.htm#wp55499

had issues with the one you included too.

Hall of Fame Super Red

Re: upgrading from CCM 4.1(2) to 5.1

New Member

Re: upgrading from CCM 4.1(2) to 5.1

Rob,

Thanks! It works!

Bill

189
Views
0
Helpful
13
Replies
CreatePlease login to create content