Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrading question for VG224

Hi all,

I am upgrading my UCM cluster to and I know that when I do all my phones will reboot and upgrade to the latest firmware. My question is will my VG224 devices do the same?



  • Unified Communications Applications

Upgrading question for VG224

Looks like either:

15.0 or 12.4.24T.   Its more of an IOS version, not so much an issue on CUCM itself.  If your IOS is up to one of the levels mentioned, you should be good.

12.4.24T is for 7.1.5

15.0 is for 8.0 and above. 

So take your pick.

New Member

Upgrading question for VG224

What I mean to ask is when I upgrade the phones will automatically upgrade if they see a newer version. I would like to know if the VG224's will do the same. I thought it wouldn't be automatic, but I thought I would check just in case.

Re: Upgrading question for VG224

Your VG224 should be fine if your IOS level is what I recommend. Im not sure if your configuration is H323, MGCP, SCCP, etc. There may be a CallManager server version that you might need to adjust as well.

Tommer Catlin

Senior Collaboration Architect

ePlus Technology, inc.

1376 Borregas Ave.

Sunnyvale, CA 94089

p.408.220.1846 (Direct)

c. 415.845.9329

Cisco Designated VIP 2011<../../../../../../Documents%20and%20Settings/lmarcum/My%20Documents/emails/>

The information contained in this electronic transmission and any attachments hereto may be considered proprietary and confidential. Unauthorized distribution of this material to anyone other than the addressed is prohibited. Any disclosure, distribution or use of this transmission for any reason other than their intended purpose is prohibited.