Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrading Unity 4.0(1) to Unity 4.2(1)

Hi, Im upgrading a Unity voicemail as above and have a problem with the licensing. On the licensing website I am being asked to supply:

1 - MAC address

2 - PAK number

3 - Serial number of the currently installed Cisco Unity security key/dongle.

Items 1 and 2 are obvious but its item 3 thats causing a problem. There is no dongle connected to this system so where do I find the serial number? I cant generate a license file without this info. Can anyone help me?

2 REPLIES
New Member

Re: Upgrading Unity 4.0(1) to Unity 4.2(1)

Assuming that you have Smartnet, I would call Licensing, and get the license number. They are usually easy to work with.

Hall of Fame Super Red

Re: Upgrading Unity 4.0(1) to Unity 4.2(1)

Hi Paul,

Just go ahead and submit the Licensing request without the Dongle info. The form is somewhat generic in that it would also be used for 3.x to 4.x upgrades where this info is required. Here is what is shown for 4.x to the lateset shipping version upgrade;

Obtaining Cisco Unity License Files

The following information is required during registration:

The MAC address (physical address) for the network interface card (NIC) in the Cisco Unity server.

The product authorization key (PAK), which appears on the sticker located on the front of the sleeve for Cisco Unity DVD 1 or CD 1.

From this doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_installation_guide_chapter09186a00804455cc.html#wp1711272

Hope this helps!

Rob

436
Views
0
Helpful
2
Replies