Download the file that is listed in Table 3 to your hard drive.
Table 3: Cisco Unified IP Phone Models 7931G Firmware Loads
Cisco Unified IP Phone Models
Executable on Software Download Page on CCO
6.0 and later
When using Cisco Unified CallManager Release 6.0 or later
For Cisco Unified CallManager 6.0, you must do all software installations and upgrades by using the Software Upgrades menu options. The system can upload and process only software that Cisco Systems approved. You cannot install or use third-party or Windows-based software applications that you may have been using with a previous version of Cisco Unified CallManager with Cisco Unified CallManager 6.0.
Using your web browser, login to the Cisco IPT Platform Administration web page
Under the Software Upgrades menu, select Install/Upgrade.
Fill in the appropriate values in the Software Location section for the file you downloaded above, and click Next.
In the Available Software drop-down box, select the file you downloaded above, and click Next.
After validating the MD5 has the correct value, click Next.
In the Warning box, verify you have selected the correct firmware, then click Install.
Check that you received a Success message.
Cisco IP Unified Phone Model 7931G Alternate Firmware format
The Cisco IP Unified Phone Model 7931G Firmware version 8.3(3)SR2 is also supplied in a zip file, as an alternative in case a Cisco Unified CallManager is not available to run the executable installer program. The name of this file is cmterm-7931-sccp.8-3-3SR2.zip.
After unzipping the firmware files, they should be manually copied to the appropriate directory on the TFTP server.
hey Rob, that takes me to the OS Admin page, which is indeed where I need to upload the phone loads. However, the readme files with the phone loads must not reflect exactly how it's done on 6.x, cause the instructions don't match up.
The TFTP Management section is what handles the phone loads, ring tones, yada yada.
Now however, I'm tyring to figure out how 6.x processes the cop.sgn files. That's the only format that I can download for 7940/7960 sccp. The readme says it'll prompt for "install" after uploading and verifing the hash, mine sure doesn't. It's like all the readme's on that download page reflect how it's done in 5.x, even the ones that say "6.0" don't seem to be accurate. The items it says to click on aren't exactly the same, like rather that "Installs/Upgrades" I have to use the "TFTP Management" - maybe I'm missing something here. But I know for sure this 6.0(1a) is different from what the readme says.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...