User getting error when try to hear message from PCA Inbox in UC 7.x
Whenever a PCA user in Unity Connection 7.x tries to hear inbox, he is getting the following error
MMApplet.Play: Quickplay cannot proceed due to a failure to obtain the stream identifier.
When press OK then we get the following
Error playing stream - waitForResource
The above situation only happens when the user use the URL which points to both servers in the cluster. If he logs in to the server directly, there is no error and could hear the message properly. This leads me to believe that there is some issue at the unity connection cluster level (may be certificate issue or some thing similar)
Re: User getting error when try to hear message from PCA Inbox i
Actually, I was able to find the work around. The work around is that you use load balancer and ask it to act like reverse proxy and translate the URL to one of the server whichever is up. I have tested and it worked perfectly fine.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...