We are running CallManager 188.8.131.520-3. When my users login to their User Options page (ccmuser), they do not have access to the Call Forwarding options under Line Settings. The options are not even displayed on the page. I have gone into Enterprise Parameters, and set the option of Show Call Forward options to True, but still they are not displayed. When I turn on Show Ring Settings to true and log out of ccmuser and back in, these options show up. For some reason however, Call Forwarding will not show up. Is there any other setting that could be hiding these from my users? Thank you in advance.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...