The version of Qfiniti that was available back in 2010 was certified on CUCM 7.x using Passive SPAN logging and call recording utilizing Cisco Built-in-Bridge. Knowing what we know now , that version would also work with CUCM 8.0 as long as sRTP was not being utilized.
Today (2014), the HP Qfiniti 10.2 product supports sRTP and CUCM 10 using the Cisco Built-in-Bridge call recording interface. We also support call recording using Passive SPAN logging, through sRTP is not supported in that call recording interface.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...