Can someone post a basic VG204 config file so I can compare it with one I have for our fax machines. We are running CCM 6.1 with what I believe is a H323 Gateway... I think... How could I tell if I have H323 or MGCP?
You can tell what type of gateway you have configured by going to devices --->gateway, then click find. It will say what type of gateway you have configured in the icon to the left of the "device name". You can add a VG204 as a gateway here and it will be configured using SCCP. You can then configure the 4 FXS ports of the VG204 as if they are SCCP devices. This is the easiest way to configure the VG gateways. there are commands needed on the VG side. Check out this link, please rate if helpfull, thanks.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
[toc:faq]CUCM Database Replication is an area in which Cisco customers
and partners have asked for more in-depth training in being able to
properly assess a replication problem and potentially resolve an issue
without involving TAC. This document discusse...