I have configured a new VG224 just as an existing one is configured and am running across an issue with the ports not providing dial-tone when they are registered to CUCM 7.1. They are configured as SCCP. Hear talk-battery but do not receive dial tone. The ports that aren't registered atleast provide a busy signal. Any help would be greatly appriciated.
I'm experiencing the same problem. One port has talk-battery but no dial tone. All other ports seem to be working. IOS version 12.4.22T3. Callmanager version 8.6.2. All ports are mgcp configured as POTS. Any troubleshooting hints would be appreciated.
My memory is kind of foggy on the reasons why, but I did find that the timeouts ringing infinity is on all of my voice-ports.
timeouts ringing infinityvoice-port 2/2
Since all of your ports are registered with call manager this is the only thing I see that may help. If you add this to a port and still are not receiving dial-tone, let me know and I can dive into it further.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...