03-25-2009 08:31 AM - edited 03-18-2019 10:45 PM
Our VG248 indicates an error in the CallManaegr Application Event Viewer. All 48 ports are registered in Call Manager so not sure why this is occuring.
Error: DeviceTransientConnection - Transient connection attempt.
Connecting Port: 0
Device name [Optional].:
Device IP address.: <Publsher>
Device type. [Optional]: 255
Reason Code [Optional].: 6
App ID: Cisco CallManager
Cluster ID: CM-Cluster
Node ID: <Subscriber>
Explanation: A connection was established and immediately dropped before completing registration. Incomplete registration may indicate a device is rehoming in the middle of registration. The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection.
Recommended Action: No action is required if this event was issued as ...
03-25-2009 10:55 AM
that is related to port 0 from vG248, configure it on CUCM and errors will disappear.
HTH
java
if this helps, please rate
03-25-2009 11:07 AM
What is required to make the port configured? I am not using the Voice Mail integration so all I have on that port is the Device Pool and Calling Search Space.
Thanks for the reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide