Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

VG248 - Transient Connection - What is causing this?

Our VG248 indicates an error in the CallManaegr Application Event Viewer. All 48 ports are registered in Call Manager so not sure why this is occuring.

Error: DeviceTransientConnection - Transient connection attempt.

Connecting Port: 0

Device name [Optional].:

Device IP address.: <Publsher>

Device type. [Optional]: 255

Reason Code [Optional].: 6

App ID: Cisco CallManager

Cluster ID: CM-Cluster

Node ID: <Subscriber>

Explanation: A connection was established and immediately dropped before completing registration. Incomplete registration may indicate a device is rehoming in the middle of registration. The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection.

Recommended Action: No action is required if this event was issued as ...

2 REPLIES
Cisco Employee

Re: VG248 - Transient Connection - What is causing this?

that is related to port 0 from vG248, configure it on CUCM and errors will disappear.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Re: VG248 - Transient Connection - What is causing this?

What is required to make the port configured? I am not using the Voice Mail integration so all I have on that port is the Device Pool and Calling Search Space.

Thanks for the reply.

188
Views
0
Helpful
2
Replies
CreatePlease to create content