Cisco choose not to enable the video functionality of the Breeze UI within MeetingPlace Express. You would need to use an onnet video-capable end point such as a 7985. MPE only provides voice activated video switching of the conference. You have no floor controls available.
Alternatively, you can look at WebEx, Cisco Unified Video Conferencing (CUVC), or MeetingPlace 7. Each has a slightly different story and this entire product line is going to significant transition right now.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...